跳至产品信息
1 / 4

BerryC Store

MENZERNA One-Step Polish 3in1 三合一高阶抛光 (250ml & 1 Litre) Made in Germany

MENZERNA One-Step Polish 3in1 三合一高阶抛光 (250ml & 1 Litre) Made in Germany

常规价格 RM127.50 MYR
常规价格 RM0.00 MYR 促销价 RM127.50 MYR
促销 售罄
Title
One-Step Polish 3in1 Medium Cut polish – high-gloss finish and seal in one An unbeatable all-arounder. Polish out sanding marks caused by 3000 grit, reliably remove smears, swirls, and shadows, and protect the high-gloss finish – all with a single product. This one-step polish combines speed and simplicity, making it ideal for novice polishers and the detailing of used and year-old vehicles. → One-step polish: Polish, finish, and seal → Removal of sanding marks (3000 grit) → Speedy high-gloss finish → Noticeably smoother finish → Can be overpainted → Silicone-free 1.Clean the surface thoroughly. 2.Shake the bottle before use and apply the polish to the Medium Cut Foam Pad. 3.We recommend a rotary or orbital polishing machine and the cross-coating method to achieve a perfect result. The polish can 4.also be applied by hand using the Hand Polishing Applicator. 5.While polishing, exert moderately strong pressure to begin with, using the medium rotational speed range of the polishing 6.machine. Reduce the pressure and the rotational speed during the final cycles. 7.At first, the polish will seem a little greasy and should be worked in until only a slightly transparent/oily film is visible. 8.Following application: Leave OSP 3in1 to dry for 5 to 10 minutes and remove any residual polish with the Premium microfiber cloth, without applying any pressure. 9.Depending on the demands of the surface, the 3in1 product can be reapplied using the Wax Foam Pad in order to achieve an even better finish. 强力中抛,镜面还原和密封蜡3in1 一款全能型产品。能够有效去除3000号砂纸痕,去除刮擦印痕、螺旋纹和雾影。还原高度光泽镜面,为漆面提供保护,这些都能通过这一款产品完成。这款一步抛光产品同时兼具抛光操作简单且高效,非常适合抛光新手。适用于所有颜色汽车漆面,新车亮彩及二手车焕新。 → 一步抛光工艺:中度切削力抛光、无炫光还原、打蜡3合1 → 去除砂纸痕(3000#) → 高亮度漆面还原效果 → 手感光滑的漆面 → 可以安全重涂 → 不含硅 1. 彻底清洁表面。 2. 摇晃瓶子,将抛光剂涂在中抛海绵盘上。 3. 使用同心或偏心抛光机,呈井字型横竖交替抛光。也可以使用手持器手动涂抹抛光剂。 4. 抛光时,起抛使用中等转速,施加中度下压力,在最后收光时降低压力和转速。 5. 一开始,抛光剂看起来有点乳白色,应该一直抛光到看到一层略带透明/油性的薄膜为止。 6. 采用以下方法:让3in1干燥5到10分钟,用优质超细纤维布擦拭漆面,无需施加任何下压力。 7. 根据表面要求,可以使用上蜡海绵盘重新涂抹3in1产品,以获得更好的光亮度。
查看完整详细信息