MENZERNA Super Heavy Cut Compound 300 终极打磨抛光剂 (250ml & 1 Litre) Made in Germany

Super Heavy Cut Compound 300 The ultimate abrasive polish for maximum sanding removal further improved The ultimate sanding polish for modern automotive clear coats with maximum sanding effect and the latest technology. SHCC 300 if removes P1200 grit sanding marks and signs of usage in the shortest time possible without damaging the surface. Without aggressive solvents. → Extremely high abrasion → Exceptionally quick removal of sanding marks → Reliable removal of very deep scratches → Premium polishing materials → No buildup of dust → Easy to use → Silicone-free → A little goes a long way Recommended usage 1. Clean surface thoroughly prior to polishing. 2. Shake the bottle prior to use and apply the following quantity of the product onto the polishing pad. Recommendation for a 40cm x 40cm area: Pad with a diameter of 95mm: 3-4 pea-sized drops Pad with a diameter of 150mm: 5 pea-sized drops Pad with a diameter of 180mm: 6-7 pea-sized drops 3. Use the Menzerna Heavy Cut Foam Pad or Menzerna Lambswool Pad in the event of heavy signs of use. With a rotary polishing machine use our Menzerna Standard Lambswool Pad and, for an orbital polishing machine, our Menzerna Orbital Wool Pad. 4. Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply strong, even pressure while polishing and extend the product with a constant low machine speed. 5. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible. 6. Once you have finished polishing, remove any residue with our Premium Microfiber cloth, without applying any pressure. 7. Any signs of sanding marks and use have now been removed. For an exceptionally glossy finish, now apply one of our Menzerna Finishes. 进一步改进最终研磨抛光以最大程度去除研磨 现代汽车清漆的终极打磨抛光剂，具有最大的打磨效果和最新技术，可在很短的时间内去除砂粒 P1200 的打磨痕迹和磨损痕迹，而不会损坏表面。它免除了腐蚀性溶剂。 → 极高的耐磨性 → 极快的研磨去除 → 非常深的划痕被可靠地去除 → 优质抛光材料 → 无粉尘发展 → 易于加工 → 无硅 → 无难闻的溶剂气味 → 高产 1.抛光前：彻底清洁表面。 2 使用前摇动瓶子，然后将以下量的产品涂抹在抛光垫上。 40 厘米 x 40 厘米区域的建议： 直径95mm的垫子：3-4颗豌豆大小的水滴 直径150mm的垫子：5颗豌豆大小的水滴 直径180mm的垫子：6-7颗豌豆大小的水滴 3. 如果有严重磨损迹象，请使用 Menzerna Heavy Cut Foam Pad 或 Menzerna Lambskin Pad。使用带有旋转抛光机的 Menzerna 标准小羊皮垫和带有偏心抛光机的 Menzerna 轨道羊毛垫。 4.使用旋转式或偏心式抛光机，交叉作业。抛光时施加强大、均匀的压力，并以恒定的低速运行产品。 5. 上光剂开始时略呈乳白色，应进行至只能看到略微透明或油状的薄膜为止。 6. 抛光后，用优质超细纤维布清除抛光残留物。 7. 研磨和使用痕迹现已消除。为了获得完美闪亮的表面，现在应用 Menzerna 面漆去除任何已形成的全息图。