MENZERNA Power Lock Ultimate Protection 聚合物漆密封胶 (250ml & 1 Litre) Made in Germany
MENZERNA Power Lock Ultimate Protection 聚合物漆密封胶 (250ml & 1 Litre) Made in Germany
Regular price
RM212.66 MYR
Regular price
RM0.00 MYR
Sale price
RM212.66 MYR
Unit price
/
per
Power Lock Ultimate Protection
Polymer sealant for all automotive clear coats
This specialist product with staying power not only offers a long-lasting seal, but also reliably protects against environmental influences. The polymer sealant boasts an unbeatable beading effect, not to mention peerless deep shine. Also suitable as a long-lasting coat sealant for new vehicles.
→ Cutting-edge sealant technology
→ Exceptionally long service life
→ Maximum protection against environmental influences
→ Premium beading effect
→ Vehicle value retention
1.Clean the glossy surface with Menzerna Control Cleaner.
2.Shake the bottle before use and apply the sealant to the Wax Foam Pad.
3.Apply the sealant using an orbital polishing machine (and the cross-coating method). The product can also be applied by
hand using the Hand Polishing Applicator or a microfiber cloth.
4.Exert light and even pressure while polishing and apply the product with a consistently low rotational speed.
5.Leave the sealant to dry for 25 to 30 minutes and remove any residual polish with the Premium microfiber cloth, without
applying any pressure. Leave the sealant to harden in a protected area for at least 3 hours.
6.Optionally, you can reapply PLUP after 4 hours for a longer-lasting sealing effect.
所有汽车透明漆的聚合物漆密封
长距离专业密封、可靠地防止环境影响。聚合物封条具有优异的疏水效果,同时具有深度光泽。也适用于长效新车漆密封胶。
→ 密封技术
→ 保持时间长
→ 防止环境影响
→ 疏水性能
→ 保护车辆的价值
1. 用Menzerna Control清洁剂清洁已经发亮的表面。
2. 使用前摇动瓶子,并在蜡泡沫垫上涂抹密封胶。
3. 使用偏心抛光机(在回廊中)进行密封。也可以使用手动抛光涂抹器或超细纤维布手动进行涂抹。
4. 在抛光过程中施加轻而均匀的压力,并以恒定的低速延伸产品。
5. 让密封件干燥25至30分钟,然后用优质超细纤维布无压去除抛光残留物。让密封件在受保护的房间中硬化至少三个小时。
6. 可选:为获得更长的密封效果,请在4小时后重新涂抹PLUP。